建筑大样及详图3
图书馆设计工程
摘要：摘要：本设计是南昌市某高校图书馆设计。根据设计任务书和综述报告的要求，总建筑面积为7320㎡，底层占地面积为1830㎡，总高为21.60m，属高层建筑。根据设计要求，设防烈度为6度，抗震等级为二级，设计中不考虑抗震设计。本方案采用钢筋混凝土现浇框架结构。主体结构为双向承重框架，对最不利活荷载和最不利内力进行分析，通过D值法求得风荷载作用值。通过弯矩二次分配法求得荷载组合作用值。本方案基础形式采用柱下独立基础，楼梯为钢筋混凝土现浇板式楼梯。整个方案设计基本符合设计和结构要求，具有一定的创造性和合理性。
.0×5.4米、5.4×7.3米。阅览室、开架阅览室。总用地面积为4000平方米，占地面积为4200平方米，总建筑面积为6280平方米，总建筑高度为21.5米。
平面柱网采用：7.3×5.4米，图书馆主楼为四层框架结构，图书馆一层设有图书验收、装订、编目、典藏、采编，二楼设有办公室及期刊阅览室、学生普通阅览室、教师阅览室，三层设有学生专业阅览室、外文阅览室、书库。四层设有学生自习室、研究室、教师阅览室。
关键词：建筑结构设计舒适性框架结构独立基础
Abstract
The librarydesign of the universityof NanChang City,According to the request of the design mission book and the overviewreport.Therewill be four stories in the librarybuilding,with a height of 21.6 meters,with the floor area of 1830 square meters,and the librarycovered area of 7320 square meters.The region's earthquake establishes to defend 6 degrees of earthquake intensity,anti-earthquake grade is three.Two parts totally:The first part is the building design part,include the engineering general situation and design basis,elevation;The second part designs the part for the structure,including the calculation of knothole calculation,stairs,making sure that the structure computes JIAN3 TU2,lotus to carrythe calculation,the level lotus to carryto compute inside the dint,the carries toward lotus to compute inside the dint,basal calculation etc.contents.Design towin to make use of the reinforced concrete knowledge and graphics tool PKPM,AutoCAD,Word text file to edit the knowledges,such as software and the cultural heritage index...etc..
The main building of libraryis four layer frame structures,the first layer establishes the book to check before acceptance,binding,prepare catalogue,small scaled bookstore.the second layer establish the office and reading stack and the room for discussion,the third layer establishs the reading room of Periodical and reading stack.the fourth layer establishs the electronics reading room and reading stack.
Keyword: Construct the structure design
目录
摘要..Ⅰ
1.建筑设计部分1
1.1工程概况2
1.2设计依据3
1.3结构选型4
2.结构设计部分4
2.1现浇板，等细部结构的计算5
2.2现浇楼梯计算13
2.3框架结构计算24
2.3.1确定计算简图24
2.3.2各种荷载设计值计算25
2.3.3框架内力计算25
2.3.4内力组合51
2.3.5框架梁配筋计算51
2.3.6框架柱柱下基础设计69
1字数
2摘要
3设计所包含文件
4任务书
5目录
建筑大样及详图
建筑大样及详图2
建筑大样及详图4
建筑施工
结构大样及详图6
结构大样及详图7
结构大样及详图8
结构施工
楼梯
结构大样及详图5
