刷新页面加入收藏夹

弹簧片冲压工艺分析与成形模具设计-冲孔落料连续模、弯曲模含20张CAD图带开题+说明书

图片展示附件预览 2020-05-22 文件列表浏览下载收藏已收藏 报告错误 手机访问 [复制链接]

A工件图

摘要
本次主要是进行弹簧片冲压工艺分析与成形模具设计。弹簧片是一个常见的工业产品，以前用复合模来生产，一副模具只能生产一个尺寸的工件。随着工业的发展，产品的尺寸规格越来越多，提出了一副模具能生产各种尺寸与厚度产品的要求。本次设计选用连续模和弯曲模具组合方案，不仅解决这一个问题，还提高了材料的利用率。用连续模和弯曲模分别生产，只要换掉部分零件，就可以生产其它尺寸的零件。在设计过程中，尽可能地选用标准零件。这有利于降低成本、减少工作量。着重介绍了连续模具的材料选娶模具结构、工艺分析与计算、主要零件设计、制造工艺过程。同时给出了弹簧片弯曲模实用结构，计算了弹簧片的回弹量，介绍了弯曲模具工作过程。该弯曲模采用一个垂直浮动凸模和两个水平移动的成形工件的弯曲回弹获得补偿。该弯曲模结构简单，工作可靠，操作方便，效率高，适用于弯制弹簧片类的小工件。
Abstract
This is mainly a spring-stamping process of forming and Design of the Bending Die for Spring Pieces，Spring Pieces is a common industrial product, it even made from composite mold, but it can only produce a size ofworkpiece. With the development of industry the size specification of product become more and more. Put forward request that one mold can produce avariety of size and thickness of product. The design has selected this program(continuo-us mold), not only to solve the problem, but also to improve the utilization of the material. Using continuous mold to produce, just change some parts of the mold, it also can produce others size of products. During the design process, choosing the standard component as far as possible. Because, it is helpful to reduce costs and cut down the amounts ofwork. The design is divided into five part，that is : Material selection, Mold structure, Art and crafts analysis and calculation, The main parts design, Manufacturing process.A practical structure of the bending die for forming spring pieces is presented. Theworking process of the die is introduced. The rebound quantity of the spring pieces has been calculated.Avertically floating punch and two horizontally movable die blocks are used for the die to compensate the rebound of the formed spring pieces.
目录
内容提要Ⅰ
AbstractⅡ
前言1
1绪论2
1.1冲压技术理论概述2
1.2冲压加工经济性分析3
2零件工艺性分析及确定工艺结构方案4
2.1产品零件图4
2.2零件工艺性分析4
2.3确定冲裁工艺方案5
3确定模具总体结构方案6
3.1模具类型6
3.2操作与定位方式6
3.3卸料与出件方式6
3.4模架类型及精度6
4工艺计算6
4.1排样设计与计算6
4.2冲裁力、压力机的选取及压力中心计算9
4.3压力中心的计算10
4.4凸、凹模刃口尺寸计算11
4.5卸料结构设计、弹性元件的选用和计算15
5连续模的主要零件设计16
5.1凸凹模结构设计16
5.2定位形式与结构设计20
5.3结构件与安装22
5.4模架23
5.5模具紧固件与自制零件选用24
5.6压力机的选用与校核25
6弯曲模设计计算26
6.1弯曲力的计算及压力机的选择26
6.2弹簧片的回弹量计算27
6.3弯曲模工作部分尺寸的确定28
6.4弯曲模的结构零件设计31
6.5弯曲模具弹簧结构及选用32
6.6弯曲模整体模具结构34
6.7弯曲模具工作过程35
6.8弯曲模零件总体尺寸的确定35
7模具的装配36
7.1模具装配的要点概述36
7.2连续模的装配工艺37
8方案二：进行冲孔落料的设计38
8.1零件的冲裁工艺分析38
8.2操作与定位方式38
8.3卸料装置的设计38
8.5工艺计算39
8.6凸凹模刃口尺寸的计算40
8.7冲裁力的计算40
8.8模架的选择41
8.9紧固件选用42
8.10压力机的选择42
9两种方案的优缺点42
9.1制造精度及使用寿命比较42
9.2模具的安装和调整43
9.3其它方面比较43
总结44
参考文献45
致谢46