零件图
轴承架的加工工艺及钻扩铰Φ16H7的工装设计
摘要
本设计轴承架零件加工过程的基础设计的钻扩铰孔夹具设计。主要加工部位是平面和孔加工。在一般情况下,确保比保证精密加工孔很容易。因此,设计遵循的原则是先加工面后加工孔表面。在零件的夹具设计中,主要是根据零件加工工序要求,分析应限的自由度数,进而根据零件的表面特征选定定位元件,再分析所选定位元件能否限定应限自由度。确定了定位元件后还需要选择夹紧元件,最后就是确定专用夹具的结构形式。
关键词:轴承架零件;工艺;夹具;
Abstract
The design of turntable parts machining process based design of fixture design. The main processing parts processing plane and holes. In general, ensure easy to guarantee precision machining holes than. Therefore, the design principle is first machined surface after machining hole surface. In the fixture design of parts, mainly according to the requirement of machining process, the number of degrees of freedom analysis should limit, then according to the surface characteristics of components selected location element, then analyze the selected location components can be qualified shall be limited degrees of freedom. Determine the location element also need to select the clamping element, the last is to determine the structure of the special fixture.
Keywords: cutter turntable parts; technology; fixture;
目录
摘要II
Abstract III
第1章零件的结构分析2
1. 1轴承架的用途2
1. 2轴承架的技术要求2
1. 3轴承架的工艺性3
1. 4轴承架的生产类型确定3
第2章轴承架机械加工工艺规程设计4
2.1分析零件图4
2.1.1零件的作用4
2.1.2零件的工艺分析4
2.2选择毛坯制造形式4
2.3拟定工艺路线4
2.3.1划分加工阶段5
2.3.2选择基准5
2.3.3确定加工方案5
2.4确定切削用量及工时定额7
2.4.1铣Φ40一端面7
2.4.2铣Φ40另外一端面8
2.4.3钻、扩、铰Φ16H7孔,钻2×Φ11孔11
2.4.4钻Φ6.6及Φ13沉头孔13
第3章钻16H7孔夹具设计14
3.1夹具的夹紧装置和定位装置14
3.2切削力及夹紧力的计算15
3.3夹具的导向18
3.4定位方案分析与比较(列举了3种方案) 19
3.5钻孔与工件之间的切屑间隙21
3.6钻模板22
3.7定位误差的分析23
3.8钻套、衬套、钻模板设计与选用23
3.9确定夹具体结构和总体结构26
3.10夹具设计及操作的简要说明27
结论29
致谢30
参考文献31
夹具装配图
V形块
夹具体
毛坯图
支撑座
钻模板
过程卡
夹具设计部分
目录
设计所包含文件
摘要
字数
工序卡