托架零件的铣40X80底面夹具设计及加工工艺装备含SW三维及4张CAD图+说明书

三维夹具装配图

托架零件的工艺规程及铣底面的工装夹具设计
摘要

本次设计内容涉及了机械制造工艺及机床夹具设计、金属切削机床、公差配合与测量等多方面的知识。
托架加工工艺规程及其铣，底面的夹具设计是包括零件加工的工艺设计、工序设计以及专用夹具的设计三部分。在工艺设计中要首先对零件进行分析，了解零件的工艺再设计出毛坯的结构，并选择好零件的加工基准，设计出零件的工艺路线；接着对零件各个工步的工序进行尺寸计算，关键是决定出各个工序的工艺装备及切削用量；然后进行专用夹具的设计，选择设计出夹具的各个组成部件，如定位元件、夹紧元件、引导元件、夹具体与机床的连接部件以及其它部件；计算出夹具定位时产生的定位误差，分析夹具结构的合理性与不足之处，并在以后设计中注意改进。

关键词：工艺、工序、切削用量、夹紧、定位、误差。

ABSTRCT

This design involves many aspects of knowledge, such as mechanical manufacturing process, machine tool fixture design, metal cutting machine tool, tolerance matching and measurement.
The bracket processing procedure and its milling, and the bottom fixture design includes three parts: process design, process design and special fixture design. In the process design, we should first analyze the parts, understand the process of the parts, then design the structure of the blank, select the machining benchmark of the parts, and design the process route of the parts; Then, the size of each step of the part is calculated. The key is to determine the process equipment and cutting parameters of each process; Then the special fixture is designed, and each component of the fixture is selected and designed, such as positioning element, clamping element, guiding element, connecting part between clamp and machine tool and other parts; Calculate the positioning error caused by fixture positioning, analyze the rationality and shortcomings of fixture structure, and pay attention to improvement in future design.
Key words: process, process, cutting parameters, clamping, positioning, error.

目录

摘要1
ABSTRCT 2
序言1
一、零件的分析2
1.1零件的作用2
1.2零件的工艺分析2
二.工艺规程设计2
2.1确定毛坯的制造形式2
2.2基面的选择的选择2
2.3制定工艺路线3
2.4机械加工余量、工序尺寸及毛坯尺寸的确定5
2.5确定切削用量及基本工时6
三、夹具设计18
3.1问题的提出18
3.2定位基准的选择18
3.3切削力及夹紧力计算18
3.4定位误差分析19
3.5夹紧误差21
3.6夹具设计及操作简要说明21
总结23
致谢24
参考文献25

A3-零件图

A3-夹具装配图

A3-夹具体

A3-毛坯图

A4-工序卡[12张]

字数

设计所包含文件

目录

过程卡

夹具设计部分

摘要