A总装图
摘要:本本着节省材料、成本低廉、安全简易、效率高的原则,立足于水稻清选装置的设计与研制,完成的基本工作如下:通过对国内外技术调查取样分析,为装置关键部件和试验研究等层面提供了性能依据,在经过理论的指导合理的设计出机械装置的结构,设计了以套筒辊为主要工作部件的清选装置,来筛选谷物。本设计方案设计了套筒式眼辊筒,设计了套眼式分拣筒的直径,角速度和倾斜角,并设计和计算了所需的主要部件并检查参数,完成设备图纸和主要零件设计,主要设计包括有驱动设计,传动设计等,通过对各工作部件的设计,试制出机械装置,以求得最佳试验性能参数,进而对水稻清选装置的的性能作出优化设计。
关键词:套筒辊分拣筒驱动设计
Abstract: Based on the principles of saving materials, low cost, simple safety, and high efficiency, this thesis is based on the design and development of a rice cleaning device. The basicwork completed is as follows: Through the sampling and analysis of domestic and foreign technical surveys, it is a key component of the device. The performance basiswas provided at the levels of experiments and research. The structure of the mechanical devicewas reasonably designed after theoretical guidance, and a cleaning devicewith sleeve rollers as the mainworking componentwas designed to screen the grain. This design plan designed the sleeve-type eye roller, designed the diameter, angularvelocity and inclination of the sleeve-type sorting cylinder, and designed and calculated the required main components and checked the parameters, completed the equipment drawings and the main part design. The main design includes drive design, transmission design, etc. Through the design of eachworking part, the mechanical device is trial-produced to obtain the best test performance parameters, and then the performance of the rice cleaning device is optimized.
Keywords: sleeve roller, sorting cylinder, drive design
目录
1绪论5
1.1研究背景5
1.2国内外现状5
1.2.1一种水稻筛选装置5
1.2.2一种新型水稻筛选装置6
1.3国外研究现状8
2系统总体方案的确定10
2.1基本结构10
2.2系统总体方案设计10
3动力方案的设计12
3.1电动机的选择12
3.2选择电动机类型13
3.3确定电机工作时的功率13
3.4确定电动机的转速14
3.5传动比的确定和分配14
4.1皮带轮的设计计算15
4.2滚筒链传动设计和计算17
4.2.1链轮齿数17
4.2.2链条节数17
4.2.3计算功率17
4.2.4链条节距17
4.2.5实际中心距18
4.2.6计算链速18
4.2.7作用在轴上的压力18
4.3搅龙链传动设计和计算18
5.1窝眼型孔20
5.2分选滚筒20
5.3滚筒结构的确定21
5.4螺旋搅龙22
5.5螺旋供料器的转速23
5.6螺旋节距23
5.6机架23
6.1长粒种子轴向动力学分析23
6.2短粒种子动力学分析24
7.1各轴转速26
7.2各轴的功率26
7.3各轴转矩27
8.1轴1的设计校核27
8.2轴2的设计校核28
8.3重要轴的强度校核。 28
8.4轴承的计算30
8.5轴承载荷校核30
参考文献31
半圆加强板
壁板
承种槽
端面挡圈
防堵拔齿
滚筒
环形防漏槽
蛟龙固定架
搅龙固定盘
进料斗
套筒
推料螺旋
小支架
支承轴
支承轴1
支承轴部件
支架1
主轴
1字数
2摘要
3设计所包含文件
4设计方案
5目录
申明:内容来自用户上传,著作权归原作者所有,如涉及侵权问题,请与我们联系,我们将及时处理!